Hardware

Apple TV 4K (2026): set up four HomePods and find a lost remote

Key takeaways

  • The 2026 Apple TV 4K can use four HomePod speakers at once for a persistent surround setup, up from a pair
  • Speakers must be in matching pairs, and any mix of HomePod (2nd generation) and HomePod mini 2 works
  • The new Siri Remote can be located with Precision Finding on newer devices, or made to chirp by asking Siri
  • AV1 decoding is built in, but apps still need updates before viewers see a benefit

After reading this, you will be able to set up the 2026 Apple TV 4K with a four-speaker HomePod surround system, switch between surround and Whole Room Audio, and track down a missing Siri Remote. The review does not give a setup time.

Apple's new Apple TV 4K starts shipping four years after its predecessor. AppleInsider's review calls the price "eye-watering" and hard to justify, but also says Apple (mostly) listened to user requests. This guide covers the two that matter most in daily use: the multi-speaker audio and the remote tracking.

What you need before starting

The hardware. The 2026 Apple TV 4K is a single model, so there is no storage or Ethernet decision to make. Every unit has Apple's A19 chip, 8GB of memory, 128GB of storage, gigabit Ethernet, Wi-Fi 7, Bluetooth 6 and Thread. Thread, a low-power mesh protocol used by smart home devices, now runs at version 1.4 as of tvOS 27. Around the back are a power input, HDMI output and Ethernet port, and nothing else.

For the four-speaker setup. You need four speakers in matching pairs. The review says any combination of HomePod (2nd generation) and HomePod mini 2 works. Four HomePod mini 2 units is valid. So is two full-size HomePods at the front and two HomePod mini 2 units at the back.

For remote tracking. Precision Finding is limited to newer devices, which the reviewer says lines up with those that have Bluetooth 6. The reviewer tested it on an iPhone 18 Pro.

Cost.No UK price or UK availability is stated, so check Apple's UK store before planning a purchase.

Step-by-step process

Step 1: Connect the box (5 minutes)

The box fits under or behind a TV and looks the same as recent models. The status light has moved from the lower-right corner to the centre, so do not assume a missing light means a fault.

Step 2: Configure the HomePods (10 minutes)

Configure your speakers first. The review notes the Apple TV 4K automatically prompted the reviewer to use the room's HomePods as the dedicated audio output once they were configured. Accept that prompt.

Step 3: Choose surround or Whole Room Audio (2 minutes)

Open Control Center and use Speaker Mode to toggle between the two. Surround gives true Dolby Atmos spatial effects with real rear speakers. Whole Room Audio plays the same audio from every speaker.

The reviewer found real rear speakers made the Dolby Atmos effect noticeably better, especially in a room with no back wall. HomePods normally mimic spatial audio by bouncing sound off the rear wall, which does not work in an open-backed room.

Step 4: Locate a lost remote (5 minutes to learn)

There are two routes. Open the Find My app on a supported iPhone for Precision Finding, which the reviewer reports has centimetre-level precision. Apple does not say what technology it uses and it is not Ultra Wideband; the reviewer's assumption is Channel Sounding, which works similarly. Alternatively, ask Siri on your phone, a nearby HomePod or the Apple TV itself, and the remote will emit a high-pitched beep.

Common mistakes to avoid

  • Mixing unmatched speakers. The four-speaker mode needs matching pairs. Two HomePods plus two HomePod mini 2 units works only if each pair matches.
  • Expecting full-size HomePods to suit every room. The reviewer found the bass sloppy on full-size HomePods and opted for a soundbar in that case.
  • Expecting AV1 gains on day one. The chip supports AV1 natively, which offers nearly 50% better compression than both H.264 and HEVC, but most apps still need updates.
  • Relying on the beep in a noisy room. The chirp comes from a "tone inducer", not a speaker, and is not super loud. It was still audible from a few feet away through a plush blanket and couch cushions.

Tips that make a difference

  • Use Whole Room Audio at night. The reviewer could lower the volume and still hear dialogue clearly from the speaker right behind their head, which helps beyond the Reduce Bass and voice enhancement adjustments.
  • Use Whole Room Audio when you have a crowd, so everyone hears regardless of position.
  • Do not worry about storage. 128GB is enough for most households, and tvOS aggressively clears user storage. Apple Arcade games and Apple Intelligence are the main consumers.
  • If you run a smart home, the single model means Thread is no longer limited to a high-end version. The reviewer thinks the earlier split hurt adoption and fragmented the market.

The upgrade case rests on the four-speaker audio and the remote tracking, not on raw speed. Apple says the A19 offers up to 50% faster performance and a GPU twice as powerful, but the review treats price as the main barrier. If you want more on Apple's home plans, see our earlier piece on Apple's home hub announcement, and for Siri changes, how Siri Recap and Live Rewind work.

Next steps

If you are considering the Wi-Fi 7 hardware properly, read our guide to Wi-Fi 7 routers worth buying in 2026, as the box supports Wi-Fi 7. Finally, wait for a UK price before committing, because the source gives none.

Summary

You now know what the 2026 Apple TV 4K offers, how to pair four matching HomePods for surround or Whole Room Audio, how to find a lost Siri Remote by Precision Finding or by voice, and why the AV1 and storage changes will matter more over time than on day one.

Frequently asked questions

Can the 2026 Apple TV 4K use four HomePods?

Yes. It can use four HomePod speakers at once as a persistent setup, not just one-off AirPlay casting. The previous generation was limited to a pair. Any combination of HomePod (2nd generation) and HomePod mini 2 works, provided they are in matching pairs.

How do I find a lost Apple TV 4K remote?

Use Precision Finding in the Find My app on a newer iPhone, or ask Siri on your phone, a nearby HomePod or the Apple TV itself. The remote then emits a high-pitched beep.

How much storage does the 2026 Apple TV 4K have?

There is a single model with 128GB of storage, 8GB of memory, gigabit Ethernet and Thread. The reviewer says that is enough for the vast majority of people, even with Apple Arcade games and Apple Intelligence.

Does the new Apple TV 4K support AV1?

Yes, the A19 chip has native AV1 decoding. Netflix, YouTube and Amazon Prime all stream some content in AV1, but most apps still need updates before viewers see a benefit.

More from Future Technology HQ